Nova Microdermabrasion Part#: NM0232 - 1/2 HP Submersible Sump Pump Clean/Dirty Water Pump 400W 2115GPH W/ 25ft Cable and Float Switch Pool Pond Flood Drain

You can use the submersible pump as a helpful tool in case of flooding, a practical yard work accessory in your garden pond, or to operate a fountain!

Features:
New heavy-duty 2010 model
(UL) APPROVED/CE LISTED/CUL/GS
Powerful 8000 liters per hour
Suitable for Swimming pool, Pond, flooded area
Removable upper and lower cover for easy cleaning
Extra long 33ft (UL) cord with 3 different size prongs
Thermoplastic body protect the metal parts from corrosion.
Runs quietly,minimum vibration and is completely submersible
Oil free, grease free magnetic motor to avoid pollution in your water

Specification:
Power: 400 Watts
Voltage: 110V/60Hz
Discharge bore: 38mm
Power Cord Length: 33FT
Dia of Pipe:1",1-1/4",1-1/2"
Material: Metal,Thermoplastic
Max Drainage Depth: 16.4ft(5m)
Dimensions: 12.6"(L) x 7"(W) x 8"(H)
Horsepower: 1/2 HP, Max Flow Rate: 2115GPH(8000l/h)

Operation Tips:
The max flow is of the pump is 2115gallon/H (8000L/H). But the height should be close to 0 meter and use the discharge port of 1.5inch.
That means if you want the flow be bigger, the height of the water you put the water pump into should be lower, and using the 1.5inch discharge port.

Warm Note:
Floating ball must be kept up when the pump works. once the floating ball is down to the initial water level (about 4.7inch), the pump will automatically shut down. When the water level is below 4.7inch and above 1.57inch, you must hang the float up to continue the pump wprking. The minimum level floating ball can be drawn to is about 1.57inch.When the water level is below 4.7inch, it is best for us to take care of the pump, so that once the pump can not pump any water,the power must be cut off immediately.If not, that will lead to the coil inside the pump burned,Which causes a lot of moister internally.

Features:

• Auto Float Switch:The float switch can control start/stop Auto.when the water level is below the initial level( ≤4.7 inch), it will automatically disconnect the power and stop working;When the water level rises above the initial level( ＞4.7 inch)， the pump will start working automatically under the control of float switch.Notice:once the pump can not pump any water,the power must be cut off immediately.If not, that will lead to the coil inside the pump burned.
• Multi Fitting Elbow:Oil free motor requires no maintenance;three fittings with different diameters for outflow(1" ,1.25", 1.5") to choose from according to the flow rate
• Higher Base Plate: The higher base plate assures the prevention of debris collection in the sump pit,thermal overload protection ensures the pump operates within spec for longer durability
• Extra Long&Sealed Cord:The power cable is 16FT,which allows the pump to be removed free.In addition,the cord is sealed specially in order to prevent electrical short circuits while under water.
• Construction: Thermoplastic composite material is highly rugged; Designed and manufactured in line with the valid safety requirements;Thermoplastic body resists corrosion as there are not exposed metal parts.