Bludento Part#: BluDento BLT-2 735935199672 - BluDento Hi-Fi Bluetooth Audio Receiver aptX Classic aptX Low Latency Built-in Burr Brown DAC for Streaming with Analog and Digital Outputs

BluDento BLT-2 Is a HiFi Bluetooth Audio Receiver Only. It Is NOT a Bluetooth Audio Transmitter. This Product Does Not Work with Bluetooth Headphones/Speakers.

Features:

1. Makes any non-Bluetooth audio system Bluetooth;

2. Easy setup; Connects in seconds; No APP to install;

3. Qualcomm aptX Low Latency audio ensures your Bluetooth wireless enabled device can deliver sound in sync with visual media;

4. with APTX audio you can listen to music including streaming music from your favourite media services, without compromising on sound quality and delivers CD-like audio quality;

5. Very high signal to noise ratio 112dB;

6. Use the optical/coaxial output as a straight digital pass-through for your favorite external DAC;

7. All the outputs on this Bluetooth adapter work at the same time.

Specifications:

1. Bluetooth version 4.2, Bluetooth chipset: QualComm / CSR A64215;

2. Bluetooth profiles: A2DP v1.3, EDR;

3. aptX, aptX Low Latency, MP3, AAC and SBC audio codecs;

4. Built In DAC: TI / Burr Brown PCM5102A;

5. PCM interface: 32bit, 384KHz, Data rates: 276kBit/s & 420kBit/s;

6. SNR: 112dB;

7. Operation Range: up to 100ft ( 30m );

8. Operating Frequency: 2.4GHz;

9. Audio Outputs: Analog Stereo RCA, Digital TOSLINK Optical and SPDIF Coaxial;

10. Max VRMS level of the L&R channel output: 2.1V

Features:

• BluDento BLT-2 is a wireless Bluetooth audio receiver. It only receives a Bluetooth audio stream from iPhone, Amazon Echo, Echo Dot, Echo Plus, and etc. It does not transmit a Bluetooth audio stream to other devices. It has RCA jacks, optical TOSLINK and coaxial SPDIF outputs that you can plug into your home stereo or other sound system to play your music at an amplified level. All outputs work at the same time
• This Bluetooth audio receiver supports up to Bluetooth version 4.2 and requires very little power to run it. BluDento is with low idle consumption by the technology of Bluetooth Low Energy (BLE) and no lip sync delay by aptX low latency
• BluDento receiver is easy to use and allows a great Hi Res digital sound over Bluetooth. BluDento BLT-2 employs a separate digital-analogue-converter chip to enable audiophile grade sound output at the analog RCA jacks. The well- and natural-sounding Texas Instruments (former Burr Brown) PCM5102A is the key to the nice sound quality of this device
• The BluDento range especially outside like in a garden is considerably better than other Bluetooth audio receiver. It is mainly due to the external antenna
• What are in the box: 1. BluDento aptX low latency Bluetooth audio receiver; 2. TOSLINK optical audio cable 0.8m; 3. RCA audio cable 0.8m; 4. RCA to 3.5mm adapter female to male 0.15m; 5. Micro USB power cable 1m; 6. User manual; 7. DC 5V 0.2A - 3A USB power plug required (NOT INCLUDED)

UPCs:

• 735935199672

EAN:

• 0735935199672