Antop Part#: ANTV601W 747742142291 - ANTOP ANTENNA ANTV601W Smartpass Amplifier TV Signal Booster with High Gain & Low Noise & Built-in 4G LTE Filter -3ft and 0.3ft Coaxial Cables, USB Power Adapter and 5ft USB Cable Included

ANTOP Technology An exclusive technology offered by ANTOP, the inline Smart pass Amplifier’s all-in-one design, allows you an easier connection and more possibilities in different receiving ranges. You don’t have to hesitate any more on deciding between a short range and long range antenna! Tips 1. Re-scan the channels after each switching of the Smart pass Amplifier. 2. Scan channels monthly to find all available channels including newly added or changed. 3. Do not place or hide the Smart pass Amplifier in/behind any metallic objects. 4. Keep the antenna away from any high power consumption devices to avoid interference. -When using SMARTPASS AMPLIFIER with any non-amplified antenna, note that antenna effectiveness is also influenced by its distance from the signal origination point, station signal strength level, building construction, antenna positioning, reflections from nearby structures and any power consumption sources. -THE AMOUNT OF FREE OVER-THE-AIR CHANNELS YOU CAN RECEIVE WILL VARY BY AREA AND ANTENNA SELECTION, CHECK SIGNAL AVAILABILITY AT FCC. GOV (HTTPS: //WWW. FCC. GOV/MEDIA/ENGINEERING/DTVMAPS). Smart pass Amplifier Frequency Range: 87. 5-700MHz Receiving Range: FM/VHF/UHF Gain: 16dB Max Power Supply: DC5V/50mA USB AC/DC Power Adapter& USB Cable Input: 100-240V~50-60Hz, 150mA Output: DC 5V 200mA USB Cable Length: 5ft What’s in the box AT-601W Smart pass Amplifier and Power Supply Kits USB AC/DC Power Adapter USB Cable Instruction/User Manual

Features:

• SMARTPASS AMPLIFIERAn exclusive technology offered only by ANTOP, uses an all-in-one design to allow an easier connection between a non-amplified/passive antenna and your TV delivering the correct balance between short and long range reception. The Smart Switch is recommended to be switched ON to boost weaker signal level reception, and switched OFF to avoid amplification overload for stronger signal reception.
• built-in 4G filter ANTOP was the first antenna Manufacturer to include a built-in 4G filter in all their amplified products to block 3G and 4G wireless signals to ensure noise-free digital TV reception.
• HIGH GAINIt is designed to Amplify VHF and UHF SIGNALS with a LOW NOISE level, less than 2dB. Fit for any non-amplified TV antenna. Not recommended for use with an amplified antenna.
• EASY INSTALLATION3ft and 0. 3ft extension coaxial cables are attached at either end for easy connection. Smart pass amplifier must be powered to function. Unit can be powered via the included USB cable by connecting to any USB power adapter supporting 5V output on USB-port.
• On-line customer support & Installation assistance ANTOP products include a 12-month and 30-day money back .
• Power Source Type: Corded Electric

Catalog Numbers:

• 12304110031

UPCs:

• 747742142291

EAN:

• 0747742142291