Mouse move on Image to zoom

Share with your Friends:

Miuzei 10 pcs SG90 9G Servo Motor Kit for RC Robot Arm Helicopter Airplane Remote Control

$17.99

Miuzei Part#: MS18-A 602430670893 - Miuzei 10 pcs SG90 9G Servo Motor Kit for RC Robot Arm Helicopter Airplane Remote Control

Miuzei SG90 9G Micro Servo Motor Kit for RC Robot Arm Helicopter Airplane Remote Control

Product Specification
Mode Number：MS18

Control Specification：
Control system:Change the pulse width
Amplifier type:Analog controller
Operating trave:l120°±10° (900→2100 μsec)
Left&Right travelling Angle deviation:≤ 6°
Centering deviation:≤ 1°
Neutral position:1500 μsec
Dead band width:7 μsec
Rotating direction:Counter Clockwise (900→2100μsec)
Pulse width range:900→2100 μsec
Maximum travel:About 120° (900→2100 μsec)

Apply Environmental Condition：
Operating Temperature Range:-10℃～50℃
Operating Voltage Range:4.8V～6.0V

Electrical Specification (Function of the Performance)：
Operating speed (at no load) 0.09±0.01 sec/60°(4.8V ) 0.08±0.01 sec/60°(6V)
Running current (at no load) 400±30mA (4.8V ) 500±30mA(6V)
Stall torque (at locked) 2.0±0.20kg·cm (4.8V ) 2.2±0.20kg·cm(6V)
Stall current (at locked) 1300±40mA (4.8V ) 1600±50mA(6v)
Idle current (at stopped) 6±1mA (4.8V ) 6±1mA(6v)
Running life(at no load) >350000 Turns(4.8V ) >320000 Turns(4.8V )
Temperature drift(at 25°C) ≤5°C(4.8V) ≤7°C(6V)

Mechanical Specification：
Limit angle:200°± 1°
Weight:9 ± 1 g
Connector wire gauge:＃28 PVC
Connector wire length:250 ± 5 mm
Spline:21T
Horn type:Cross,star and bar-type
Excessive play:≤0.5°

Appearance Inspection：
Dimensions:L23xW12.2xH29mm

If there any problem or concern with our product when you get it, you could reach out to us and write message about your issue via Amazon mail:https://www.amazon.com/ss/help/contact/?_encoding=UTF8&marketplaceID=ATVPDKIKX0DER&ref_=v_sp_contact_seller&sellerID=A34CQKEVNF2MJX

Features:

  • Application Fields: remote control helicopters, micro robot, robot arm and boats. ALL kind of R/C Toys and Arduino experiments
  • Interface Type: compatible with JR & Futaba interface. No Load Running Speed: 0.09±0.01 sec/60° at 4.8V Rotary Angle: 120°
  • Stall Torque (4.8V): 17.5oz /in (1kg/cm) Dead band width: 7usec
  • Amplifier type:Analog controller Operating voltage: 4.8V～6.0V
  • Please note: The starting current of the motor should be over than 1A and they are analog servos need to continuously provide PMW signal, then it will be work normally.

UPCs:

  • 602430670893

EAN:

  • 0602430670893
  • Manufacturer: Miuzei
  • Part Number: MS18-A
  • Color: Sg90 Servo Motor