This Dixon BLS617 water fitting is the male half of a brass long shank coupling for joining two water hoses of the same size. It has a barb for push-on connection to a hose with a 3/4" inside diameter (ID) on one end and a male Garden Hose Thread (GHT) threaded connection on the other end to connect...

The Dixon global Type C aluminum A380 cam and groove fitting has a straight body and two openings for connecting two hoses or pipes with cam and groove fittings. It has one female cam coupler end for connecting to male groove adapters and one hose shank end for connecting to hoses (Type C). The body...

This Dixon 179 Series tee hose fitting is made of forged brass and connects and branches three hoses. This tee fitting has barbed ends to create a tight seal on a hose when used with a hose clamp or crimp sleeve or ferrule (not included). It is made of forged brass for greater strength than cast bra...

This Dixon 179-0606 brass hose splicer tee fitting is suitable for joining three hoses. This tee fitting is T-shaped and has three openings to connect and branch three hoses, two on the main run and one branch at a 90-degree angle from the middle of the tee. Pipe dimensions for tees are represented...

How to clean & sanitize the beer line with this connector when changing kegs? 1.Disconnect your tubes and fittings, place them into a sink or container with water and chlorine. 1/4 cup per gallon of water should do, but more is okay. 2.Set for an hour or so then thoroughly rinse with clear water u...

The Spears 1407 series tube fitting is made of gray polyvinyl chloride (PVC) plastic and has a 90-degree elbow shape for connecting schedule 40 polyethelene (PE) pipe to threaded pipe conforming to the National Pipe Thread (NPT) standard at an angle. This elbow has a barbed fitting on one end to cre...

This Banjo HB150-125 barbed hose adapter is made of glass-reinforced polypropylene and has a 1-1/4" barbed connection on one end and a 1-1/2" male NPT threaded connection on the other to connect a tube or a hose to a female NPT threaded connection. This schedule 80 adapter is made of glass-reinforce...

Rain Bird BT50/4PK drip irrigation 1/2" barbed tee 4-pack. From the Manufacturer: Quickly and easily connect 1/2" drip tubing in a "T" shape with this barbed coupling. High quality barbs grab tubing creating a fast, and secure leak-proof connection. Ideal for repair or to extend additional tubing in...

ActionEliters Irrigation Fittings Kit for 1/2" Tubing 24 PIECE SET Package includes: 6 Tees - This universal barbed "Tee" is designed to quickly and easily connect three lengths of 1/2" Drip tubing in a "T" shape. 6 Couplings - This universal barbed coupling is designed to quickly and easily conne...

This Banjo HB200-150 barbed hose adapter is made of glass-reinforced polypropylene and has a 1-1/2" barbed connection on one end and a 2" male NPT threaded connection on the other to connect a tube or a hose to a female NPT threaded connection. This schedule 80 adapter is made of glass-reinforced po...

This Dixon CAB Series King short shank complete set hose fitting is made of aluminum with a brass nut and connects hose to threaded pipe conforming to the NPSM standard. It has a barbed end to create a tight seal on a hose when used with a hose clamp or crimp sleeve or ferrule (not included), and ma...

PATHONOR Orange atomization plus one rod drip nozzle combination 15M hose + nozzle 30 + connector 3 + accessories bag + manual