The Plugable USB-AUDIO is an easy way to instantly gain a headphone and a microphone jack to your existing USB audio class enabled system. Featuring a clean, compact black design, this USB audio adapter installs without needing to load any necessary drivers. It is as simple as setting this adapter a...

Getting Started with BeagleBone & BeagleBone Black Beagle boards are tiny computers with all the capability of today's desktop machines, without the bulk, expense, or noise. Read the step-by-step getting started tutorial below to begin developing with your BeagleBone or BeagleBone Black in minu...

BeagleBone Black is a low-cost, community-supported development platform for developers and hobbyists. Boot Linux in under 10 seconds and get started on development in less than 5 minutes with just a single USB cable. Processor: AM335x 1GHz ARM Cortex-A8 512MB DDR3 RAM 4GB 8-bit eMMC on-board fla...

Arducam-2MP-Plus is optimized version of Arducam shield Rev.C, and is a high definition 2MP SPI camera, which reduce the complexity of the camera control interface. It integrates 2MP CMOS image sensor OV2640, and provides miniature size, as well as the easy to use hardware interface and open source...

40 PCS High Performance Raspberry Pi Heatsink Kit Aluminum Heatsink for Raspberry Pi B B+ 2 and 3, Heatsink Copper Pad Shims, with thermal conductive adhesive tape Package Includes: 20 pieces - 8.8mm x 8.8mm x 5mm (0.35in x 0.35in x 0.20in) aluminum heat sinks 10 pieces - 14mm x 14mm x 6mm (0.55in...

10 Pieces cooling aluminium heat sink for Raspberry Pi models A, B, B+, 2, and 3 boards. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. These heat sinks have profiles which are short enough to fit w...

This is an elegant and innovative protective case designed specifically for the Beagle Bone Black. The case is a two-piece injection-moulded ABS enclosure that snaps together around the Beagle Bone. It provides tough protection for the Beagle Bone Black while providing access to all of the board's c...

8 Pieces cooling aluminium heat sink for Raspberry Pi models A, B, B+, 2, and 3 boards. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. These heat sinks have profiles which are short enough to fit wi...

- 10 Pieces cooling aluminium heat sink and 5 Pieces Copper RAM Heatsink for Raspberry Pi 3 B, Raspberry Pi 2 B, Raspberry Pi B+ - These pure heat sinks include adhesive thermal tape for efficient thermal transfer to the heatsink providing additional cooling - These heatsinks have profiles which are...

Description One of the best things about Beaglebone Board is the massive accessible GPIOs coming out from its 2x 46 pin headers. However, as we know, all things has two sides - the good side and the bad side. 2x46 pins means 2x46 jumper wires, and 2x46 jumper wires putting on the board means - A RE...

This usb to ttl serial cable provide a good connectivity to your micro controller, Raspberry Pi, WiFi router. Because of the separated pin plugs, this cable is ideal for powering and connecting up to the debug/login console on the Raspberry Pi or BeagleBone Black. It can be perfectly compatible with...

USB to TTL Serial CableMoyina USB-to-TTL (Serial) Cable 3.3V is a USB to Serial (TTL level) converter which allows the user to connect directly to a microcontroller UART or I/O pins Operating system support Drivers are available to download as follow: https://www.ftdichip.com/Drivers/VCP.htmwhich al...