28 GPM Two Stage Log Splitter Pump This Versatile, high quality pump is ideal for Log Splitters or any other piece of equipment requiring high speed low pressure and low speed high pressure circuits. 21 and 7 GPM gear sets combine for 28 GPM total. Max Pressure 4000psi intermittent, 3000PSI continuo...

Angove Riverberry offers the SRMW22G26-EZ-SX and SRMW22G26-EZ 2,600 PSI triplex plunger pumps in two different mounting configurations. This pump is for vertical gas engine driven units. Please reference the pictures below showing the mounting difference between the two models. Specifications: 2.2 G...

Two set screws are included, but chain is Not included. Centrifugal Clutch 3/4" bore 12 Teeth use # 35 Chain This Clutch Will Fit 2 - 6.5 HP Engines Honda GC160, GC190, GX120, GX140, GX160, GX200 Also will fit Briggs & Stratton and 2 - 6.5 HP With 3/4" Shaft Also Will Fit Tecumseh Engines 2 - 6.5 H...

Description:100% Brand New.Professional grade 50mm socket (with offset design) for removing/installing many Acura and Honda engine crank bolts.This socket is used to maintain the harmonic damper pulley position while removing/installing the pulley bolt.Use with square socket driver.> 1/2" square dri...

Have you noticed oil leaking from your car lately? Many car owners fear the puddle they see forming under their vehicles, and many worry about the time and cost to make it go away. That leak might be due to worn or dried seals. There’s no need to worry or spend your money on a costly repair bill, ho...

Set screws and chain NOT included. Centrifugal Clutch 10 tooth, 3/4" bore, #40/41/420 chain with 3/16 key built in. Common clutch for 3.5-7hp engines using #40/41/420 chain. Mounts onto crankshaft using bolt and washer on the end of the crankshaft. Our clutch assembly with 3/4" shaft for 163cc 5.5...

A steel shaft adapter to convert a crankshaft from 1 inch shaft to 1 1/8 inch shaft. The adapter is approximately 3 inches long and includes the special key needed to go from the key way in your shaft, THOUGH the adapter and in to the pulley. Common key stock isnt thick enough to account for the add...

The Southland SEA438 43 cc 8 in. Earth Auger Powerhead features a powerful 2-cycle engine with a bit speed up to 316 RPM for quick, efficient drilling. This auger provides 1.3-feet.-lb. of torque and sports a translucent fuel tank to let you easily keep an eye on fuel levels. Unlike similar competit...

An ACDelco GM Original Equipment Engine Camshaft Position Sensor monitors the rotational position of the camshaft(s), and is a GM-recommended replacement for your vehicle’s original component. It provides a signal to the engine control module, which compares the camshaft position with the crankshaft...

Annovi Reverberi RMV25G30D-EZ horizontal plunger pump. 2.5 GPM at 3,000 PSI, spins at 3,400 RPM in a direct drive system coupled with a gasoline engine. The matching flange provides convenient connection to most 3/4” shaft 4 - 7 HP engines. The hollow shafted pump includes a built-in pressure contr...

Head Adjusts to 5 Positions. Two hook sizes easily remove most oil and grease seals. Where clearance is a problem, remove the pin to reposition the head. The adjustable head works great on front wheel drive transaxles. Also works on front crankshaft seals without removing the radiator.

Fits Engine 2 - 6.5HP with 3/4" Shaft and 3/16" Key way Fits : 2 - 6.5HP engines HONDA GC160, GC190, GX120, GX140, GX160, GX200 Fits : Briggs & Stratton and 2 - 6.5 HP With 3/4" Shaft Fits : Tecumseh Engines 2 - 6.5 HP With 3/4" Shaft Mounts onto crankshaft using bolt and washer on the end of th...