Bidirectional opto-isolated RS232 to RS485 converter allows to interface your devices using RS232 communication link to balanced differential RS485/RS422 link and vice-versa. Surge Protected Interfaces Protect Equipment, High Speed Data and the Converter Powered RS485 isolator provides optical isola...

Product Features The HDMI Repeater is mainly used for supporting the HDMI Signal long transmitting distance by amplifying the HDMI differential signal. Compliant to HDMI 2.0 and HDMI 1. 0 Support full 3D, 4K x 2K @60Hz, 2160P, serial date rate up to 6.0Gbps. Integrated signal amplifier for extending...

Kicker PXA300.4 PXA Series 4 Channel Amplifier Made for all environments, PXA-Series Amplifiers are weather-resistant with a conformal-coated circuit board for extra protection against the elements. Small Footprint PXA-Series Power Amplifiers are specifically designed for motorized vehicles with sma...

Serial ATA cables are designed to handle the differential signals implemented in todays technology. This ensure increased throughput and reduced data packet loss. We offer a variety of Serial ATA cables which minimize clutter, increase airflow and provide maximum transfer rates.This NSI 7 pin Serial...

Features: 1. Interface: Compatible with EIA / TIA RS-232C standard and RS-485 standard 2. Electrical Interface: RS-232 terminal is a DB9 female (hole shape), RS-485 terminal is a DB9 male (needle-type) connector and a small wiring board. 3. Working mode: asynchronous, half-duplex, differential trans...

The POE-SW811 is an unmanaged 10-Port Power over Ethernet Switch with a total of 96 watts of PoE power. All PoE ports run at 10/100Mbps and can provide up to 30W per port through the IEEE802.3at standard, as well as up to 60W on port 1 through Hi-PoE. It also has two Gigabit uplink ports to allow fo...

The POE-SW502 is an unmanaged 6-Port Power over Ethernet Switch with a total of 60 watts of PoE power. All ports run at 10/100Mbps and can provide up to 30W per port through the IEEE 802. 3at standard, as well as up to 60W on port 1 through Hi-PoE. It has two Ethernet uplink ports to allow for commu...

Switch Specifications: Ports: 2*10/100/1000 Base-T (Combo port), 2*1000 Base-X (Combo port), 24*10/100 Base-T (PoE power supply) PoE Power: Port 1/2 support Hi-PoE (60W); PoE+, PoE; Each power ≤30W; Total ≤240W PoE Protocol: IEEE802.3af, IEEE802.3at, Hi-PoE Switching Capacity: 8.8G Packet Forwarding...

Product Information:  10Gtek Internal Mini SAS cables assemblies provide differential impedance with tight-skew control and low cross-talk, Using 3M twin axial cable technology provides end-to-end interfaces signal integrity and performance at 3.0 Gbps to 12.0 Gbps. Adding dual porting, full duplex,...

Product Information:  10Gtek Internal Mini SAS cables assemblies provide differential impedance with tight-skew control and low cross-talk, Using 3M twin axial cable technology provides end-to-end interfaces signal integrity and performance at 3.0 Gbps to 12.0 Gbps. Adding dual porting, full duplex,...

The Rxm-f3 has a conformal coating on its PCB (printed circuit board) in this coating protects the amplifier from the elements of the ocean. If water gets sprayed on the amplifier you will not have to worry. The exterior Screws are made of stainless steel to better withstand the elements. This ampli...

EarStudio supports Qualcomm's aptX HD codec, which allows you to stream 24bit hi-res music wireless. EarStudio automatically enhances 16bit music into 24bit sound. We use CSR 8675 Qualcomm Chip and 2x DACs of AK4375a. Noise free, jitter free. EarStudio ES100 reproduces sound over Bluetooth throu...