Preferably for use with epoxy resins. The epoxy/graphite mix can be used in teak deck construction to simulate the look of seams and to protect the epoxy from sunlight. Cures to a black color. Add to mixed pot up to 10% by volume. Produces a low-friction exterior coating with increased scuff resista...

For Earthquake, Tornado, and or Natural Disaster Preparedness Kit. From treating cuts, to burns, splinters, eye irritants, cold, low blood sugar, and stings. Perfect for any office, job site, household and in the trunk, this kit has everything needed to address first aid emergencies. Extra storage i...

This is a Brand New Aftermarket Furnace Replacement Inducer Motor Kit

273 CFM 1640 RPM 115V 60/50hz. Replaces Dayton 1TDR3, 4C447 and Fasco B45227, 7063-3277

Round Permanent Split Capacitor 3.3 Inch Blower | Replaces Dayton 1TDN7, 1C180, 4C440 & Replaces Fasco 50747-D401, 71213466

This Fasco 50752-D500 centrifugal blower accepts 115V, 60 Hz, 1.1 amps power input and has a sleeve bearing for blower motor shaft support. The single-speed, single inlet blower has a free air output rating of 135 cubic feet per minute (CFM) at 3,100 revolutions per minute (RPM). The blower produces...

Furnace Flue Exhaust Blower 1/20hp, 3400 RPM 1.71 amps, 115 Volts Ball Bearings, Metal Housing Cross Reference Information: 70-24157-03, 70-22838-02, J238-150-1533, 70-101087-81, 70-101087-01, 70-24178-01, 70-24175-01, 70-24175-81, 7021-11559, 70-24157-03, 70-22838-02, 70-22838-82, Amtek 117104-01,1...

Shaded Pole, 115 Volts, 3400 RPM, 1 Speed, 2.3 Amps, CW Rotation.

This Fasco A166 centrifugal blower accepts 115V, 50/60 Hz, 1.4 amps power input and has a sleeve bearing for blower motor shaft support. The single-speed, single inlet blower has a free air output rating of 115 cubic feet per minute (CFM) at 3,200 revolutions per minute (RPM). The blower produces 11...

Thermally protected. UL recognized; CSA or ULc certified. Includes centrifugal switch. For high efficiency furnace. 70 CFM. 3000 rpm speed rating. 60Hz. 115-230 Volts. 0.9/0.45 amps. Speeds: 1. Sleeve Bearing. Cross reference information: OEM replacement for Franklin Products #80270.

1/30 HP, Shaded Pole, 115 Volts, 3000 RPM, 1 Speed, 2 Amps, CCW Rotation, Sleeve Bearing.

Dynamically balanced, this blower mounts in any position and operates with minimal noise and vibration, to maintain CFM at higher static pressures. This is probably the most used blower in the outdoor wood furnace industry. This Fan is used on the WoodMaster 4400 & 5500, HeatSource Model 1000 & Tayl...