This helps to prevent the heat from the nozzle traveling too far upwards. Without this fan, the filament could get soft above the heater block, which leads to extrusion issues and degradation of print quality. This is a DC 24V 0.06A cooling fan. Dimensions are 40mm x 40mm x 10 mm. Sufficient for use...

This helps to prevent the heat from the nozzle traveling too far upwards. Without this fan, the filament could get soft above the heater block, which leads to extrusion issues and degradation of print quality. This is a DC 12V 0.08A cooling fan. Dimensions are 40mm x 40mm x 10 mm. Sufficient for use...

FlashForge is improving and doing the updates from time to time. To make sure you have the best experience with the 3d printer, please ALWAYS UPDATE FIRMWARE TO LATEST VERSION. You can do firmware update on the printer quickly. Here are the steps: 1. Turn on the printer and go to touch screen menu “...

Leaving our competition a step or two behind, these new features are only available on the new FlashForge Creator Pro: The new front door comes pre-installed, and has been re-designed to provide easier access to prints. The new injected PC top cover comes in one solid piece, making it stronger and m...

Caution: 1.which machine model does this protective cover apply to? It Working perfect in 19x19x13mm size MK10 heater block(M7 threaded).Before you buy, make sure your heating block size is correct. if your block is the right size, and the cover work for it. 2,Provide product design drawings and put...