Holland Electronics has developed a specialized line of splitters for incorporating MoCA signal distribution and functionality throughout a home.

SATELLITE / TV DIPLEXER Provides low loss diplexing of DBS and TV signals. Separates TV and DBS signals prior to satellite receiver input, and filters harmonics in the off-air spectrum from satellite conversion devices. The DPD2 diplexer is specifically designed for Dish Networks TM DP44 installatio...

Holland Electronics has developed a specialized line of splitters for incorporating MoCA signal distribution and functionality throughout a home. MoCA technology maximizes your home network. It extends Internet all over your house using your existing coax TV cable. Home network products with MoCA in...

Holland Electronics has developed a specialized line of splitters for incorporating MoCA signal distribution and functionality throughout a home.

Holland Electronics has developed a specialized line of splitters for incorporating MoCA signal distribution and functionality throughout a home

The Holland POE filter was developed specifically for use on CATV subscriber premise internal coaxial wiring. The filters purpose is to BLOCK MoCA network generated data streams from exiting the subscriber's dwell and interfering with other neighborhood MoCA networks. The Filter also improves MoCA n...

Split cable and satellite signals without a connector cable or an external splitter by installing the Splitter/Wallplate Pro (Original). This single-gang wallplate has a built-in splitter, so you can connect two devices directly to your single cable signal. It supports direct connections for your TV...

Holland Electronics has developed a specialized line of splitters for incorporating MoCA signal distribution and functionality throughout a home.

Screw the FAM-20 in-line attenuator into coaxial cable feeds, and reduce signal strength by rated amount. Try different combinations until you get the best picture quality. Use FAM attenuators to balance signal strength from different sources.

The FAM-3 in-line attenuator can be inserted to coaxial cable feeds to reduce signal levels. Combinations of attenuators may be used together to create the exact signal loss needed.

The FAM-10 in-line attenuator can be inserted to coaxial cable feeds to reduce signal levels. Combinations of attenuators may be used together to create the exact signal loss needed.