This New Version is thinner than the old version,please pay attention. Notice: This acrylic case is a DIY item with all the parts, and needs you to assemble, adding more joy for your Raspberry Pi. Please REMOVE the PROTECTIVE FILM from both sides of the pieces. This Uniker durable plastic raspberry...

What's in the Box? 1x iUniker Pi Case 1x 30mm Cooling Fan 1x Screw Sets 3x Raspberry Pi Heatsinks Material: ABS

Package Include: 1x ABS Case 1x 40mm Cooling Fan 4x Heatsinks 1x Screw Driver

Suitable for Raspberry Pi B / Raspberry Pi B+ / Raspberry Pi A+ / Raspberry Pi 2 and Pi 3 Model B / Raspberry Pi 3 B+ Bearing Type: Sleeve Size (L x W x H): 3 x 3 x 0.7 cm Connector: 2 pin Rated Voltage: DC 3.0-5.8V Current: 0.1A Speed: 6000RPM±10% Airflow: 5m³/h Noise Level: 18dba±10% Wire Len...

Package Include: 1x 35mm Cooling Fan 4x Heatsink Sets 2x Micro Hdmi to Hdmi Cable 1x USB-C Switch Cable

- This device is perfect for turning on and off power to your Raspberry Pi 3 or other single board computer powered by MicroUSB. You can use your existing power adapters and cables provided that they can drive adequate current. Note, there will be a voltage drop across the switch. - Please note: If...

- 10 Pieces cooling aluminium heat sink and 5 Pieces Copper RAM Heatsink for Raspberry Pi 3 B, Raspberry Pi 2 B, Raspberry Pi B+ - These pure heat sinks include adhesive thermal tape for efficient thermal transfer to the heatsink providing additional cooling - These heatsinks have profiles which are...

This is an ABS Raspberry Pi Protective Clear Case for Raspberry Pi 3 B+, 3B, 2B Package Include: 1x Pi Case 1x Screw Set 2x Heatsink 4x Rubber Base

For Dual Fan: - Low Power Consumption Design - Dual Cooling Expericnce, No More Overheating Problem - Very Quiet Cooling Fan, You Can Hear Even Nothing - All of the Fans were Tested by Our Engineer, Very Nice Quality Control - Update Thermal Tape Can Make Sure Best Heat Conduction Effect For Alumin...

iUniker Raspberry Pi power swith cable was designed for your Pi, make sure your Pi shutdown or reboot without pulling the cable; Prevent the USB connector from wearing and tearing. Not only can be used for your Pi, but also for any microusb devices just like cellphone or tablets. And this cable is m...

Product Name: iUniker Ribbon Flat Cable for Raspberry Pi Camera Features: Length: 2m (6.56ft) / 1m (3.28ft) / 50cm (1.64ft) Pitch: 1.0mm Pin Number: 15pin Package Including: 3x iUniker Ribbon Flat Cable for Raspberry Pi Camera (3 Length)

This is the FIRST case Kit for Raspberry Pi 4 Model BProduct Feature: 1. All ports are available for use - New SD card Slot design is easy to insert/remove SD card, allows Breakout cable, HDMI cable and other ports for Pi access. 2. Very good heat dissipation performance - The iUniker 3007 cooling f...