-Package includes: 1 x base plate for UNO R3, 1 x terminal optimizer breadboard, mounting screws and nuts. -Base plate designed for Arduino UNO R3.

JBtek Set of 2 Cooling Heat sinks for Raspberry Pi B+, Raspberry Pi 2. Features: -Tested to fit the Raspberry Pi B+. -Pre applied thermal transfer tape. -Works on the SMCI USB/NIC controller chip. -Offer significant cooling advantage than with the heat sinks, a must have for over-clocking and/or lo...

The MB102 bread board, with two way independent control, The board can be switch between 0V, 3.3V, 5V. On-board there are two sets of 3.3V, 5V DC output pins, Please Change the jumper cap position to select 5.0V or 3.3V Voltage.

Features: -Antistatic, anit-jamming, stable performance. -Baud Rate Range: 75 ~ 115200 bsp; maximum speed up to 500 kbps. -This converter supports the latest operating systems including Windows XP, Vista, Win7. -Can be used by plugging directly into your personal computer, no external power supply o...

-

5V Relay Module 4-ChannelThis is a 5V 4-Channel Relay interface board. It can be controlled directly by Micro-controller (Raspberry Pi, Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)

JBtek DC 5V 8 Channel Relay interface board. Use it to control various appliances, and other equipments with large current. It can be controlled directly by Microcontroller(Arduino , Raspberry Pi, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).

Connect to your micro controller, Raspberry Pi, WiFi router with ease. This cable can be used for powering and connecting up to the debug/login console on the Raspberry Pi; router / ADSL update; GPS serial communication. Connect the pins to power the Pi and establish RX/TX link. Then install the Win...

The JBtek one to two PWM fan splitter, allows you to simultaneously connect two fans on one PWM socket. In order to avoid signal conflict of simultaneous fan speed measurement, one of the pins is removed from one of the headers.

Safe and easy for liquor bottles and kitchen bottles to use. These will fit snugly on the bottle.

-

This precision sensor is the best low-cost sensing solution for measuring barometric pressure and temperature. Because pressure changes with altitude you can also use it as an altimeter. The sensor is soldered onto a PCB with a 3.3V regulator, I2C level shifter and pull-up resistors on the I2C pins....