The Electrician Scissors are designed for heavy duty use. Made of high carbon steel with a special hardening process for greater durability and nickel plated for that professional look. The Electrician Scissors are notched to strip 19 and 23 AWG wire and one blade is serrated. A scraper and file are...

The Jonard CST-1900 round cable stripper strips the jacket from round cables 3/16" to 1-1/8" (4. 5 to 29 mm) in diameter. The stripper cuts PVC (polyvinyl chloride), rubber, PE (polyethylene), and other jacket materials. It makes longitudinal cuts for end stripping, spiral cuts for end stripping and...

The Jonard Tools M-216C/EX Ergonomic Can Wrench is designed to fit over long binding posts and is the perfect tool for opening telephone box fasteners and tightening nuts on binding-post terminals. The can wrench features the following: 1) Hex shape on outside of sockets can be used with a wrench to...

The Jonard Tools JIC-375 Three Hole Fiber Optic Stripper performs all common fiber stripping functions. This fiber optic stripper strips the 1. 6-3 mm fiber jacket, 600-900 micron buffer coating, and 250 micron coating down to expose the 125 micron glass fiber. The first hole strips the fiber jacket...

The Jonard FOD-2000 fiber optic drop cable slitter cuts slits in the end or mid-span in 0.250" flat drop fiber optic cables. The cable slitter cuts both sides of the cable to provide access to the fiber or strength member. The slitter can be used to cut mid-spans.Jonard Industries manufactures hand...

The Jonard Tools CC-2721 Cable Caddy is constructed of sturdy 0. 060” thick and 7/8” diameter tubular steel with two leg chains for increased durability. There is no setup required to start using the Cable Caddy: just place it on the floor, remove the cotter pin, and load your reel. The Cable Caddy...

The Jonard SST-716 security shield adapter tool is used to install 7/16" hex shielded F-type connectors. A knurled handle provides a secure grip and a steel loop provides turning leverage and secure handling. The body is constructed of heat-treated steel with a black-oxide finish to provide durabili...

Forged and heat treated, this Lineman's Wrench is used on pole line hardware. It is open-end double end type with two sizes of openings at each end and an oval hole for turning pole steps. The end openings accommodate nuts for 3/8", 1/2", 5/8" and 3/4" bolts and the head of the 1/2" drive screw. The...

Connector-Crimping Plier with Side Cutter designed to press UG, UR, UY, 709 series connectors, crimping "B" type connectors, and AMP tel splice connectors. A special stop behind cut out prevents damage to connectors. Utilized on combinations of plastic and pulp insulated 19, 22, 24 and 26 gauge copp...

The Jonard Tools patented and award-winning MS-6 Mid span slitter is designed to open fiber Jackets and provide easy access to optical fibers in loose buffer tubes with 1.2 - 3.3 mm diameter. With 6 precision grooves to handle various cable sizes, The sleek ergonomic design allows you to open a fibe...