The CSI-HDMI adapter board is designed for V1 and V2 Raspberry pi camera board to extend the camera over the long cables while keeping the high-speed CSI signals away from noise and interference. By using high speed HDMI cable, the camera can run over 10 meters, that high extend the usage of the Ras...

The IR Infrared Obstacle Avoidance Sensor Module detection range can be through the potentiometer to adjust and have small interference, easy to assemble, easy to use. It can be widely used in robot obstacle avoidance, obstacle avoidance car, line count, and black and white line tracking and so on O...

The Raspberry Pi Camera V2 features the same, tiny footprint (25mm x 23mm x 9mm) as the original Pi Camera module, but features an upgraded Sony IMX219 image sensor which has a native resolution of 8 megapixels. The fixed-focus lens can capture 3280 x 2464 pixel images and 1080p30, 720p60 and 640x48...

Product Description: Brand new compatible replacement tv lamps with brand new housing Part Number: 915B441001, 915B441A01 Fit for: WD-60738, WD-60C10, WD-65638, WD-65C10, WD-73638, WD-73738, WD-73C10, WD-82838, WD-73838 Features: Easily installed into the existing housing Brand New Equivalent Lamp...

The DB3 is an all in one door lock and override module that covers over 90% of cars on the road today. It will support legacy systems like VATS and PASSLOCK as well as support door locks and override on the most modern of cars like Toyota with push-start ignition system and Chrysler with electronic...

Easier and faster way to flash your OS image into the eMMC Module. With this unit, you will not need a separate USB card reader. Just attach your eMMC module directly to your PC/Mac via this writer board. - USB 3.0 Interface - Native eMMC 8bit wide data interface, instead of slow SD 4bit width - Wor...

Features 5 Channel Fan Controller Touchscreen LCD Liquid Crystal Display Module Temperature Monitor Fan RPM Display Fan Fail Alarm Fits 5.25″ Bay Easily Setup and UseSpecificationsProduct Name: 5 Channel Touchscreen Fan ControllerModel No: FPX-007Dimensions: 5 7/8"(L) x 3 1/16"(W) x 1 5/8"(H)Color:...

Description: Material: Experimental Board + Mixed Alloy Color: Black Chip Module: CP2102 Working Temperature: -40 ℃ ~ +125 ℃ Power Input: 4.5V ~ 9V (10VMAX), USB-powered Drive Type: Dual high-power H-bridge driver Current: continuous transmission ≈70mA (200mA MAX) Standby:

Module parameters: 1.PCB Size: 37.3mm (Long) *15.5mm (wide) 2. Weight: 3.5g 3. Input voltage: 3.6V--6V, prohibit exceeding 7V 4. Leads 6 feet: EN/VCC/GND/RXD/TXD/STATE (Bluetooth state leads, not connected output low level, the output high level after connection) 5. With the connection status ind...

Description: This raspberry pi camera collocation zero camera cable, you can easily switch the camera mode. Can be used for all versions of zero, and can be used for Raspberry Pi 4/3/2 and Zero/ Zero W. Come with zero/zero w camera cable and black high quality camera stand. Model: Pi-CAM-5MP Sensor...

Introduction This is a high-quality I2C LCD 2004 display. It's in elegant blue with white contents displayed. It can display 4 rows with 20 characters for each. With IIC/I2C interface, it only takes two I/O port thus saving more for other usages. You can adjust the contrast by the potentiometer at i...