#2 Morse taper mount for Delta, Jet, PSI, and other Midi lathe headstocks and tailstocks. A 1/2-Inch diameter 3-jaw mechanism can be used for securing small turnings or pen mandrels at the headstock, or a drill bit in the tailstock. Accepts a 1/4-20" draw bolt (not supplied) for safety. Will hold dr...

Ideal chisel kit for turning pens pepper mills spindles bowls and lots more woodturning projects of all sizes Each chisel measures 16 25" in length with a 6 25" M2 High Speed Steel blade and a 10" hardwood turned handles Set includes (8) chisels 3/16" Parting Tool 5/8" Spear Scraper 1" Skew Chisel 5...

Heavy duty #2MT live tailstock center with a 60 degree point. Huge live center for heavy duty workpieces. Cone is 2-1/2" long, by 1-11/16" diameter. This center is large and strong with precision bearings. It runs very true and is also well balanced and smooth for effective turning. Ideal to support...

Heavy duty chrome-plated self-centering chuck will hold your work tight & secure on midi and full size woodworking lathes. Chuck is pre-threaded to 1" x 8tpi and includes 3/4" x 16tpi headstock spindle adaptor; Chuck body weighs 4 lbs and is 4" in diameter. Includes #1 step jaws 3/32" to 1-7/8" Exte...

PSI Woodworking's Big Gulp dust hood has a large 13-by-16-inch opening. It's an ideal hood for miter saws, lathes, radial arm saws, carving, sanding, and planers without hoods. It's lightweight and portable and has a tough ABS plastic construction. The 4-inch port to connects to any dust collection...

Includes: Receiver, Hand Control, 9V Battery. Input Voltage 110-125 Volts AC; Maximum 16 AMPS; Maximum Horsepower 1. 5HP. 50 foot range; 5 foot cord on receiver module; Requires 9V battery (included). FCC approved; RF signal goes through walls with no outside interference: Unlimited programmable fre...

Get a better bite on your spindle with PSI's new 1' Super Center. More teeth give a better bite while providing equal pressure and a positive drive. There is no need to hammer your drive center into the work piece and risk splitting your work. The PSI Super Center Crown compatible with headstocks wi...

Put a beautiful and durable finish on your turned items with ease - ideal for pens! EEE-Ultra Shine produces a brilliant finish prior to applying Shellawax. Use after applying Shellawax for a dryer shine. Can also be used over French polish, lacquers and polyurethane to produce a brilliant, blemish-...

This pen Mandrel package includes a 7mm drill bit, (5) 7mm bushings, #2MT Mandrel saver Tailstock center, and a #2MT basic Mandrel (No threads or knurled nut). are you tired of bending your Mandrel and ruining the point on your live center? if so, then this package is for you. Mandrels usually bend...

#1 Morse Taper. Includes (5) 7mm bushings, knurled nut, and 7mm drill bit. This mandrel easily adapts to different length projects. Features a 7mm mandrel shaft that slides through a headstock collet. Simply mount your tubes and bushings, then slide the shaft to the appropriate length and lock it in...

8" flat jaws used for finishing bowl bottoms when attached to a Barracuda scroll chuck. The Jaws open to accommodate an 8-inch bowl. Includes : 8 - 1/2" and 8 - 3/4" rubber bumper pegs (16 total) to securely hold your bowl in position. It is easy to adjust sizes with the 4-position peg system. Compa...

Now you can both disassemble and assemble your pen parts on one easy to use tool. Acts as a traditional pen press to reliably and accurately press your pen parts together, while the disassembly function gives you an invaluable way to take virtually any pen apart. You'll get the following components:...