Set up a compressed air system with the 3/4-Inch Maxline Master Kit with 3 air outlet locations. The Maxline tubing has an aluminum core sandwiched between an inner and outer layer of polyethylene. Tubing can be mounted on wall surfaces, in wall, or buried underground or concrete. Tubing holds any h...

Set up a compressed air system with the 1/2-Inch Maxline Master Kit with 3 air outlet locations. The Maxline tubing has an aluminum core sandwiched between an inner and outer layer of polyethylene. Tubing can be mounted on wall surfaces, in wall, or buried underground or concrete. Tubing holds any h...

The Maxline 3/4-Inch tubing x 3/4-Inch tubing x 3/4-Inch tubing, Tee fitting, features a compression fitting style to make fast and easy connections. There is no glue, soldering or crimping needed. Simply cut the tubing to length, insert in the fitting and tighten.

The Maxline 3/4-Inch tubing x 1/2-Inch Male NPT adapter fitting, features a compression fitting style to make fast and easy connections. There is no glue, soldering or crimping needed. Simply cut the tubing to length, insert in the fitting and tighten.

The Maxline 3/4-Inch tubing x 3/4-Inch tubing, Elbow fitting, features a compression fitting style to make fast and easy connections. There is no glue, soldering or crimping needed. Simply cut the tubing to length, insert in the fitting and tighten.

Maxline outlet kit to be used with 3/4-Inch Maxline tubing. Use for wall or ceiling mount applications. Block is ported on the back side for rear entry also. Includes moisture drain.

This is a M8039 3/4" in-line shut off ball valve for Rapidair Maxline 3/4" tubing. This is a solid brass valve that is nickel plated to resist corrosion. This ball valve has a 175 PSI max working pressure, features a double O-Ring sealed compression style fittings on each end specifically designed t...

The Maxline 3/4-Inch tubing x 3/4-Inch Male NPT adapter fitting, features a compression fitting style to make fast and easy connections. There is no glue, soldering or crimping needed. Simply cut the tubing to length, insert in the fitting and tighten.

The Maxline 1/2-Inch tubing, Plastic Tubing Clamp (10-Pack), is designed to mount 1/2-Inch Maxline, tubing. Single mounting screw hole allows for fast installation time. Recommended clamp spacing is 36-Inch.