Sure-temp 6" x 48", 6T-48, All Fuel, Double Wall, Chimney Pipe. Comes equipped with locking band and solid pack insulation. Tested to withstand 2100 F and is UL listed. Test helps to prevent product damage, or structural hazard during brief periods of this excessive chimney temperature. Constructed...

3" inch, 3VP-90 Degree, Elbow, Model VP. Type L vent systems for pellet stove applications. For use in accommodating unusual offsets and configurations. Rated for flue temperatures up to 570 degrees F. Model VP may be installed with a minimum 3" inch air space clearance to combustible surfaces, fram...

3", 3VP-TS, Pellet Vent Tee, with Tee Cap, Model VP, Type L Pellet Vent. Replaces the pipe connector and is used to transition from horizontal to vertical orientation. Features rolled-over male end which eliminates sharp edges and internal spacing bead that assures uniform insulating air space betwe...

3", 3VP-WT, Pellet Wall Thimble. Model VP, Type L Pellet Vent. Must be used for all thru the wall installations involving combustible construction. Maintains airspace clearance with combustibles and centers the pipe between the walls. Telescopic design can be used on standard walls 5" Inch to 9" Inc...

DSP6E4-1, 6" D, Adjustable, 45 Degree Elbow. Used to offset Double Wall Stove Pipe toward insulated chimney in a through-the-wall installation. Non-positional connection system allows 360 degree rotation. Constructed with a matte black, steel outer casing with a stainless steel inner lining smoke an...

3" 3VP-HC Pellet Horizontal Termination Cap. Model VP, Type L Pellet Vent. Termination is specifically designed for use on installations in which the vent terminates in a horizontal orientation. Made with the highest quality. Constructed from stainless steel.

3", 3VP-PC, Pipe Connector. Model VP, Type L Pellet Vent. Used as a starter section to connect the flue collar of the appliance to the model VP vent system. Attaches to the appliance outlet, allowing for easy pipe connection. Can be used in vertical and horizontal installations. Features proven gask...

3", 3RV-WT, Wall Thimble. Adjusts 4-1/8" to 7" to fit wall thickness. Round Type B gas vent. When installed according to manufacturer specifications, the wall thimble provides the required 1 inch air space to combustibles. Tested and listed per UL-441 for installation as type "B" and B-W gas vents t...

6" inch Diameter Damper Kit. Allows the operator to alter the amount of air drawn through the venting system, controlling the stoves combustion. Must be installed directly on stoves flue outlet where applicable. When handle is in horizontal position the damper is closed, reducing combustion. When ha...

Thru-The-Wall 3" Type L Pellet Kit. Vent system for pellet stove applications. Designed for horizontal installations only. This kit includes one pipe adaptor, one wall thimble, one tee with cleanout, five 1' pipe lengths, one wall strap, one 90 elbow and one horizontal cap. Appliance's flue gases mu...

Selkirk 3VP-A6 Pellet Adapter Pipe SSII pellet stove pipe adapter. Type L insulated 3'' adapter for pellet stove applications. "SELKIRK" PELLET VENT ADAPTER. Allows transition from pellet vent to Class A insulated chimney. Bulk. *#3VP-A6. 3"x6"

3" x 12", 3VP-WZAJ12, Adjustable Pellet Stove Pipe, Model VP. Type L vent gives installer the ability to add from 2-1/2" length to a maximum of 10-1/2" when slid over another piece of type L pellet pipe. Designed to be telescoped over a fixed length of vent in order to create an assembly of specific...