Permatex Medium Strength Threadlocker Blue Formula is an all-purpose threadlocker ideal for all nut and bolt applications 6mm to 20mm. Eliminating the need for stocking expensive lock nuts and lock washers, this threadlocker locks and seals while preventing parts loosening due to vibration. It also...

With the same convenient packaging as the medium strength Loctite Blue Stick Threadlocker, this high strength threadlocker is better suited for heavy-duty applications where resistance to heavy shock, vibration and stress levels required. Localized heating and hand tools are required to sperate part...

Permatex High Temperature Threadlocker Red Formula is a high temperature/high strength threadlocker for heavy-duty applications, preventing bolts and press fits 10mm to 25mm from loosening due to shock, severe vibration and heat stress. Exclusive formulation for newer engines and high performance ap...

Loctite 243 Medium Strength Surface Insensitive thread locker features a general purpose, medium strength, blue thread locker with a high oil tolerance. It has a higher temperature range than all the other blue thread lockers at 360F. For fasteners between 1⁄4" to 3⁄4" (6 mm to 19 mm). Parts can be...

The original Liquid capacity is approximately a little less than 1/2 of bottle. Because, a size of bottle is 9 x 5.5 x 2.5(cm).

This round base rare-earth neodymium (NdFeB) cup magnet is made with A3 steel plate and triple coated with Nickel-Copper-Nickel to be the strongest type of permanent magnet available. The countersunk hole allows many types of mounting applications including hook, knob, or included eyebolt. Screw it...

Loctite Threadlocker 271 is a high strength, red threadlocker for heavy-duty applications. Especially well-suited for permanently locking studs and press fits. Adds 3,000 psi holding power on slip and press fit assemblies. Replaces set screws and snap rings. Locks against vibration loosening. Remova...

Permatex High Strength Threadlocker Red Formula is ideal for heavy-duty applications 10mm to 25mm and is especially well-suited for permanently locking studs and press fits. This high strength threadlocker adds 3,000 PSI holding power on slip and press fit assemblies and replaces set screws and snap...

Permatex Penetrating Grade Threadlocker Green Formula is a low viscosity threadlocking liquid that wicks along the threads of preassembled fasteners to secure them in place. Since it is applied after assembly, preventive maintenance procedures are simplified. Ideal for fasteners ranging from 2.2 to...

DESCRIPTION: Mercury MLT425B Brush-in-Cap Thread locker is a general purpose, medium-high strength, thixotropic anaerobic thread locker. The product cures when confined in the absence of air on close-fitting metal surfaces. APPLICATIONS: Mercury has revolutionized the threadlocker industry by introd...