Kookye Part#: ZZLACC2005 762640544169 - KOOKYE 5PCS Nano V3.0 ATMEGA328P Module CH340G 5V 16M Mini USB Micro-Controller Board for Arduino(Nano5)

More Download Information: www.kookye.com/?p=6382
--The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x).
--The Arduino Nano can be powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
--The ATmega328 has 32 KB, (also with 2 KB used for the bootloader). The ATmega328 has 2 KB of SRAM and 1 KB of EEPROM.

--Specification--
Microcontroller：Atmel Atmega328P-AU MCU
Operating Voltage (logic level)：5 V
Input Voltage (recommended)：7-12 V
Input Voltage (limits)：6-20 V
Digital I/O Pins：14 (of which 6 provide PWM output)
Analog Input Pins：8
DC Current per I/O Pin：40 mA
Flash Memory：16 KB (ATmega168) or 32 KB (ATmega328) of which 2 KB used by bootloader
SRAM：2 KB (ATmega328)
EEPROM：1 KB (ATmega328)
Clock Speed：16 MHz

Support USB download and Power
Support for external 5V ~ 12V DC power supply
Support power supply by 9V battery
Support ISP download
CH340G Driver Download link : http://www.wch-ic.com/download/list.asp?id=126 OR http://www.5v.ru/ch340g.htm
IDE of arduino Download link : http://arduino.cc/en/Main/Software

Dimensions：0.73" x 1.70"
Length：45 mm
Width：18 mm
Weigth：5 g

Package:
5x Nano Board

Features:

• The Arduino Nano is a compact board similar to the UNO.The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P (Arduino Nano 3.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one.
• The Arduino Nano can be powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
• Each of the 14 digital pins on the Nano can be used as an input or output.They operate at 5 volts. Each pin can provide or receive a maximum of 40 mA and has an internal pull-up resistor (disconnected by default) of 20-50 kOhms. In addition, some pins have specialized functions.
• The Nano has 8 analog inputs,each of which provide 10 bits of resolution.By default they measure from ground to 5 volts, though is it possible to change the upper end of their range using the analogReference() function. Analog pins 6 and 7 cannot be used as digital pins. Additionally, some pins have specialized functionality.
• The Arduino Nano has a number of facilities for communicating with a computer, another Arduino, or other microcontrollers.Such as UART TTL (5V) serial communication and I2C (TWI) and SPI communication。

UPCs:

• 762640544169
• 762640544480

EAN:

• 0762640544480